|
Get the Flash Player to see this player.
DESCRIPTION
EUROLUX interior varnish is an extremely durable state-of-the-art formulation suitable for all wood varieties. This product is most noteworthy for its quick-drying capabilities and its rich (non-plastic) appearance. Floors may be finished in one day as three coats of EUROLUX may be applied in eight hours! EUROLUX varnish is as wear resistant and durable as any solventborne varnish.
APPLICATION
The application of water-thinnable coatings differs from that of oil-based types. EUROLUX flows easily and spreads quickly, but do not “overwork”. Do not apply at temperatures lower than 50°F or under high humidity conditions. Unlike oil varnishes, waterborne varnishes must dry by evaporation.
Surface must be dry, clean and free from grease. Old coats of varnish must be sanded thoroughly.
New floors and woodwork: Apply three coats of EUROLUX Interior Varnish in your choice of gloss. Allow at least a four hour interval for drying between coats. Sand lightly between coats with 220 grit paper or finer and tack dust free. If thinning is required, thin very slightly with tap water – maximum 2 ounces per Eurogallon™
Old intact (sound) clear varnish work: Clean the surface and sand well with 220 grit paper. Remove sanding dust, wash thoroughly with TSP solution, rinse thoroughly and allow to dry. From this point, following instructions above for new floors and woodwork.
Newly varnished floors should be allowed to dry for at least 2 days before exposure to heavy traffic. Floors may be walked on 4 hours after application in stocking feet.
TECHNICAL SPECIFICATIONS
Application: First quality synthetic brush or lamb’s wool applicator
Thinning: Water only – maximum 2 ounces per Eurogallon™
Clean-Up: Warm water and detergent immediately after use
Drying: Dust free in 45 minutes; recoatable in 4 hours
Coverage: 2.5L = 280 sq. ft.
1 liter = 112 sq. ft.
VOC: 50
MATERIAL SAFETY
DATA SHEET
 Eurolux
varnish gloss
Eurolux
varnish satin |