|
Get the Flash Player to see this player. DESCRIPTION
ECO Primer/Undercoat is a “hybrid”, water thinnable alkyd coating intended for new interior or exterior woodwork. This primer is the preferred foundation for any ECO or HOLLANDLAC paint system because of its ability to penetrate and lock onto new wood. If absorption of primer occurs, reprime to obtain uniform film build before painting. SURFACE PREPARATION
Surface should be clean, dry and free of dust, oil, grease and all foreign material that would affect adhesion. Prior to priming, all cracks or surface blemishes should be filled, sanded smooth and cleaned thoroughly. Shellac all knots before priming. APPLICATION
Tools: Use a first quality synthetic bristle brush or “hot dog” type foam roller. ECO Primer/Undercoat may also be sprayed – do not over thin (maximum 2 oz water per Eurogallon™. Do not apply at temperatures below 40°F or above 80°F, or when relative humidity exceeds 80%. TECHNICAL SPECIFICATIONS
Binder: urethanized alkyd emulsion
Pigments: high quality pigments
Vehicle: Water
Thinner: Water
Specific Gravity [g/cm3]: 1.28
Solid contents
• by weight: 51%
• by volume: 37%
Viscosity: 115-120 KU
Recommended thickness:
• wet: 220 microns/coat (applied in 2 coats)
• dry: 80 microns/coat (applied in 2 coats)
Drying time: 1 hour tack free, 6 hours recoatable MATERIAL SAFETY DATA SHEET  Eco primer undercoat – FOR U.S. ONLY
INDEPDENDENT LAB REPORTS Independent lab reports from DL Labs
|
