EUROLUX Masonry Primer

$140.00

Interior or exterior, acrylic masonry primer.

2.5L

Surfaces: Primer for brick, cement block, poured concrete

Description

DESCRIPTION
EUROLUX Masonry Primer is an advanced water-thinnable acrylic primer suitable for use on any properly cured masonry surface. This primer is suitable for use on exterior masonry surfaces which will be finished with EUROLUX House Paint. EUROLUX Masonry Primer may also be used on interior surfaces which will be coated with any Fine Paints of Europe coating.

SURFACE PREPARATION
Surface to be primed must be clean, dry and free of any loosely adhering coatings. Surfaces should also have cured for at least 180 days before receiving this primer.

APPLICATION
Tools: An inexpensive synthetic or natural bristle brush or roller. There is no need to use an Omega brush with this coating.

Do not apply when temperature is below 50°F, above 90°F, or when relative humidity is above 80%.

Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so.

PACKAGING/COVERAGE
2.5L container covers approximately 250 sq. ft. depending on surface.

TECHNICAL SPECIFICATIONS

  • Binder: acrylic copolymer
  • Pigments: high quality pigments
  • Solvent: water
  • Thinner: water
  • Specific gravity [g.cm3]: 1.13
  • Solids content:
    • by weight: 32%
    • by volume: 23%
  • Viscosity: 110-115 KU
  • Specular Gloss (60°): 18-22 GU
  • Drying time: 1 hour dust free
  • 5 hours recoatable
  • Finish: Satin, white
  • Color: White
  • VOC: 50

MATERIAL SAFETY DATA SHEET
Eurolux Masonry Primer – FOR U.S. ONLY