Key Primer .75L Euroquart

$65.00

Interior or exterior, waterborne primer for metals, fiberglass and plastics (Note: Not for polyesters or hard PVC).

Surfaces: Bonding primer for use on all metals, galvanized finishes and most plastics

Applications: Plastic furniture, gutters, range hoods, plastic shutters and vinyl siding

Description

DESCRIPTION
Key Primer is a state-of-the-art, waterborne primer. This primer offers good hiding power and adhesion. Key Primer is suitable for interior and exterior use. Tools used for the application of Key Primer clean up easily with hot water. Keyprimer is non-combustible. Keyprimer is off-white in color.

SURFACE PREPARATION
One coat of FPE Oil Primer/Undercoat must be applied over Key Primer in instances where Hollandlac Brilliant or Satin is the desired topcoat.

Surfaces contaminated by oil or grease should be cleaned with solvent. Roughen surface with fine sandpaper.

APPLICATION
Tools: Use synthetic brush or foam “throw away” applicator.

Do not apply when temperature is below 50°F, above 90°F, or when relative humidity is above 80%.

Please note: Fine Paints of Europe recognizes spray application as an excellent method to apply our coatings, however we do not consult on the specifications nor the equipment needed to do so.

PACKAGING/COVERAGE
.75L container covers 120 sq. ft.

TECHNICAL SPECIFICATIONS

  • Drying time: 30 minutes tack free (at 68°F and 65% humidity)
  • 8 hours recoatable
  • Finish: Matte, off white

TECHNICAL DATA SHEET

MATERIAL SAFETY DATA SHEET
Key Primer – FOR U.S. ONLY